apnic-128-v002-draft
APNIC Document identity
Title: APNIC SIG Guidelines
Short title: sig-guidelines
Document ref: APNIC-128
Version 002
Date of original publication: xx October 2016
Date of current version: TBD
Review scheduled: n/a
Obsoletes: APNIC-128-v001
Status: Draft
Comments: Document review recommendations as reported at APNIC 50
Table of Contents
- Definitions
1.1 SIG
1.1.1 SIG Charter
1.2 WG
1.3 BoF
1.4 Chair
1.5 Co-Chair
1.6 Consensus
- Special Interest Groups (SIGs)
2.1 Creating a SIG
2.2 Dissolving a SIG
2.3 SIG Chair and Co-Chair roles
2.3.1 Chair responsibilities
2.3.2 Co-Chair responsibilities
- Chair or Co-Chair Elections
- Working Groups (WGs)
- Birds of a Feather (BoFs)
- SIG Presenters
6.1 General presentation hints
- Code of conduct
- Procedure for changing these guidelines
1. Definitions
1.1 SIG
Special Interest Groups (SIGs) provide an open public forum to discuss topics of interest to APNIC and the Internet community in the Asia Pacific region.
SIG forum (in case of Policy SIG, Open Policy Meeting (OPM)) are held at APNIC Conferences. Between SIG forums, discussions continue via subscription-based SIG mailing lists (archived on the APNIC website). SIGs are open to all interested participants.
1.1.1 SIG Charter
A SIG charter is a short description of the SIG’s purpose and related activities. The AGM/AMM must reach consensus on any new or altered SIG Charter.
1.2 WG
Working Groups (WGs) focus on a particular work item and exist only as long as it takes to complete the task(s). A working group is usually small and consists of volunteers willing to dedicate themselves to one particular task. A Working Group reports back to the body that created it.
1.3 BoF
Birds of a Feather meetings (BoFs) are informal meetings convened for a variety of purposes, such as exchanging information and discussing new ideas or particular issues. They can be proposed and convened at short notice and there is no formal requirement to submit papers or post to mailing lists.
1.4 Chair
A Chair is responsible for coordinating the activities of a SIG, BoF, or WG. The role of Chair is voluntary.
1.5 Co-Chair
Co-Chairs work with the Chair to coordinate the activities of a SIG, BoF, or WG. The role of Co-Chair is voluntary.
1.6 Consensus
Consensus is achieved when everyone consents to the decision of the group. The decision may not be everyone’s first preference but is acceptable to all participants.
For more information refer to APNIC Policy Development Process here
1.7 AGM/AMM
APNIC General Meeting (AGM) is held at APRICOT/APNIC conference and APNIC Member Meeting (AMM) is held at APNIC standalone conference. APNIC Executive Council (APNIC EC) elections take place at the AGM and NRO NC elections take place at the AMM.
2. Special Interest Groups (SIGs)
2.1 Creating a SIG
The recommendation to create a new SIG may come from:
- Mailing list discussions
- An existing SIG
- AGM/AMM endorsement
- A BoF
After a new SIG has been recommended, the following steps must occur:
- Hold a preliminary BoF
A new SIG cannot be created unless a BoF has been held. The purpose of the BoF is to:
- Determine interest in the proposed subject area
- Find a person to volunteer as acting Chair
- Draft a charter for the SIG
- Seek endorsement at the AGM/AMM
The outcomes of the BoF are reported to the AGM/AMM. The report should include the draft charter, BoF attendance numbers, the level of participant interest, and the nature of the discussions. The AGM/AMM attendees will be asked to indicate by a show of hands whether there is consensus to endorse the formation of the new SIG.
- Create a mailing list for the SIG
When the SIG has been endorsed, the APNIC Secretariat will create a subscriber-based mailing list for the SIG. Anyone can subscribe to a SIG mailing list.
- Formally issue a call for SIG Chair and Co-Chair positions on the mailing list
The APNIC Secretariat will issue a call for SIG Chair and Co-Chair positions according to the procedure described in Section 3 of this document.
- At the first forum of the new SIG, endorse the draft charter and elect Chair
At the first forum of the new SIG, the attendees will be asked to endorse the proposed charter and to formally elect the Chair for the SIG.
2.2 Dissolving a SIG
It is not assumed that a SIG will continue to exist indefinitely. Each SIG should periodically review its charter to assess the SIG’s usefulness and relevance.
Signs that a SIG may have outlived its purpose include:
- Lack of discussion on the mailing lists for more than one year
- Lack of response to calls for presentations at SIG forums
- Low attendance at SIG forums
A SIG may be dissolved if the members of the SIG decide that this is an appropriate course of action and this recommendation is approved by the AGM/AMM. Members of the SIG may make the decision to dissolve the SIG via the SIG mailing list or at a SIG forum.
If a SIG is dissolved, all associated mailing lists will be closed for subscription, but the public archives will remain on the APNIC website.
2.3 SIG Chair and Co-Chair roles
SIG Chairs and Co-Chairs perform a vital role in managing the SIGs. The effectiveness of a SIG is dependent on the active participation of the Chair and the Co-Chair. All SIG Chairs and Co-Chairs undertake their work on a volunteer basis.
SIG Chairs and Co-Chairs are expected to attend at least one of the two APNIC Conferences held each year. The APNIC Secretariat provides Travel Support for SIG Chairs to meet these obligations.
https://www.apnic.net/community/participate/sigs/sig-guidelines/sig-chair-travel-policy/
Note: Any amendments to the SIG Chair Travel Support is at the sole discretion of the APNIC EC.
When SIG Chairs and Co-Chairs attend an APNIC Conference, and a forum is held for the SIG, they are expected to attend that forum. SIG Chairs and Co-Chairs must remain subscribed to the SIG’s mailing list for the duration of their term.
The roles of the Chair and Co-Chair are listed below:
- Responsible for facilitating discussions at the SIG, with respect to bottom-up and inclusive spirit, so that SIG participants are comfortable to express their opinions.
- To accommodate all newly expressed opinions, relevant to the discussions topics at
- the SIG to be heard.
- Before making a consensus decision at the SIG forum, explain to the participants what the question is or decision to be made, and open up the floor for the participants to express their opinions.
- To consider all opinions expressed in a balanced manner, before making the consensus decision.
- The consensus decision must be shared with the SIG participants. When reporting to the AGM/AMM about consensus decisions at the SIG, information should be consistent with what was shared with the SIG participants.
2.3.1 Chair responsibilities
In addition to the roles described in Section 2.3 above, the administrative responsibilities of the Chair and Co-Chair are listed below:
Before an APNIC Conference
- Monitor mailing list discussions
- Call for presentations (or Policy proposals if Policy SIG) on the appropriate mailing list
- Read or review submitted proposals or presentations
- Accept or reject proposals or presentations for discussion at the forthcoming SIG forum (and suggest an alternative forum if the topic is not within SIG charter)
The Chair may decide that a proposal or presentation is not suitable for discussion at the forthcoming SIG forum if:
- the proposal or presentation is out of scope for the SIG charter
- The proposal or presentation is insufficiently developed to be the basis for a useful discussion
- The agenda has already been filled by topics of greater priority
- In case of policy proposals, after coordinating with APNIC Secretariat, announce the proposals to Policy SIG mailing list
- Liaise with speakers as necessary
- Coordinate with APNIC Secretariat to publish the SIG forum (or OPM if Policy SIG) agenda
At APNIC Conference
In case of Policy SIG, Chairs
- should meet with proposal authors before the Open Policy Meeting (OPM)
- read the author’s slides to familiarise themselves with the proposal details (the SIG Chair(s)
- should already have read the proposal text before the OPM or forum
- Check if any details in the latest original version of the proposal have been changed in the presentation to be shown in the Open Policy Meeting (OPM). If changes have been made,
- ensure the proposal author submits an updated version of the proposal before the OPM
- Chair the SIG forum or OPM (at least one out of every two per year)
- Create agenda presentation slides for the SIG forum or OPM
- Present slides with SIG open action items (if any). Ask parties responsible for action items to report on the action item status
- Encourage active participant involvement.
- confer with Co-Chairs and report any decisions they have reached to the OPM or SIG forum
- In case of Policy SIG, Chairs meet with EC members and NRO NC before the AGM/AMM to discuss
- policy proposals approved by consensus
- Present OPM or SIG forum report to the AGM/AMM
After APNIC Conference
In case of Policy SIG, Chairs
- Send policy proposal outcomes to Policy SIG mailing list:
- Monitor discussion during the comment period
- Following the end of the comment period, post the decision regarding whether the proposal has maintained consensus.
- The Chair may delegate tasks to Co-Chairs as necessary
2.3.2 Co-Chair responsibilities
Co-Chair tasks include but are not limited to:
- Attending at least one of the two APNIC Conferences held each year. If SIG forums or OPM are held, SIG Co-Chairs are expected to attend the forum or OPM
- Remaining subscribed to the SIG mailing list for the duration of their time as Co-Chair
- Monitoring SIG chat-room discussions and Q&As during the SIG forum or OPM at APNIC Conferences
- Undertaking any of the tasks normally performed by the SIG Chair, if requested
- In the event that a Chair is unavailable to perform some of their duties, the Co-Chair will be expected to be the substitute as required.
3. Chair or Co-Chair Elections
Chairs and Co-Chairs are elected for a two-year period. Elections occur yearly at APNIC standalone conference. Chair elections and Co-Chair elections occur in alternate years.
The first official Chair of a new SIG will serve for two years. The first official Co-Chair position for a new SIG will be open for election after one year (allowing for the staggered Chair and Co-Chair election timetable). Subsequent Co-Chairs will serve for a full two-year term. If a current Chair/Co-Chair resigns or is removed before the end of the term, the successor will take over the remaining term of the position, and not the regular term (two years).
More than one Co-Chair may be appointed, at the discretion of the Chair. The decision to hold an election for more than one Co-Chair is at the Chair’s discretion. The community may also decide to open up a second Co-Chair position for election, based on consensus at the OPM or SIG forum.
A new Chair or Co-Chair is elected using the following process:
3.1 The APNIC Secretariat sends a call for nominations to the SIG mailing list and the apnic-talk@apnic.net mailing list so that the widest coverage is received.
The call contains:
- Details of the duties of the position
- The closing date for nominations (one month after the initial call)
- Where to submit nominations (usually by online form)
- A request that potential nominees should include a short biography and description of their interest
3.2 Candidates must confirm that they are willing and able to commit to the responsibilities associated with the Chair and Co-Chair positions. If a candidate is not contactable via email, or does not respond, then their nomination will not be confirmed. Unconfirmed candidates will not be eligible for election to the position of SIG Chair or Co-Chair.
3.3 If more than one nomination is received by the closure date, an election must be held. If there is only one candidate, the community should demonstrate consensus support for the candidate.
3.4 The election will be held online using the same voting system as APNIC EC and NRO NC elections.
- Nominations
- Nominations are managed by the APNIC Secretariat.
- Any individual residing within the Asia service region may be nominated, except for staff members of any Regional Internet Registry (RIR).
- Self-nominations are permitted.
- Nominees must meet the same eligibility criteria as the voters in Section 3.4.3
- Nominees will be invited to provide a recorded video ‘candidate statement’ to publish on the conference website.
3.4.2 Nomination period
Nominations will open five (5) weeks before the APNIC conference and close four (4) weeks after the initial call. A reminder may be sent seven (7) days before the nominations close date.
All nominations will be listed on the APNIC conference website after the APNIC Secretariat confirms the nominee is willing and able to fulfil the role and obligations in Sections 2.3, 2.3.1 and 2.3.2 of this document.
3.4.3 Voting eligibility
To take part in SIG election online voting, an individual must meet the following two criteria to vote:
- Registered for the current conference with the registration form submitted before the start of the current conference.
- Registered and attended at least one of the past eight (8) APRICOT or APNIC standalone conferences (not including the current conference).
Eligible registered attendees will vote online in the SIG elections using their APNIC Login. They will be entitled to one vote using the online voting system. Verification of an individual’s entitlement to vote against official records will be used where necessary.
3.4.5 Voting period
Online voting for eligible registered attendees will open two (2) hours after the start of the APNIC conference and will close at the end of the lunch break on the last day of the APNIC conference and before the start of the AMM.
3.4.6 Voting Administration
APNIC Secretariat staff will administer the voting process and answer any queries from voters.
3.4.7 Election results
SIG online election results will be announced at the AMM. APNIC Secretariat staff or the Election Chair appointed for the NRO NC elections will announce the SIG election results. Election results will also be published on the conference website.
3.4.8 Announcements
Where applicable, announcements regarding the SIG elections will be posted to the conference website, SIG, and apnic-talk mailing lists.
The SIG Chair or APNIC Secretariat staff will present information on online voting as the first item of the OPM or SIG forum agenda.
3.4.9 Dates and Times
SIG online election dates and times will be same as the APNIC standalone conference location time zone and represented in UTC format.
3.5 If a current Co-Chair stands for the position of Chair and is elected, the newly vacant Co-Chair position can be filled by one of the remaining candidates for the Chair position or by a call for volunteers at the OPM or SIG forum.
3.6 Unless new Policy SIG Chairs and Co-Chairs are required immediately, there will be a handover period. Outgoing Chairs and Co-Chairs are expected to follow proposals reaching consensus at the current OPM, to the completion of the Policy Development Process.
3.7 Removing a Chair or Co-Chair
If a SIG Chair or Co-Chair does not attend one in every two APNIC Conferences and does not attend the SIG forum held at the APNIC Conference, the Chair or Co-Chair will be removed from their role. The process of electing a replacement will then begin.
If SIG members do not think that the Chair or Co-Chair is sufficiently performing their duties (as described in Sections 2.3, 2.3.1 and 2.3.2), they can express their concerns on the mailing list or in the OPM or SIG forum. If there is consensus that the Chair or Co-Chair is not sufficiently performing their responsibilities, the Chair or Co-Chair will be removed. The process of electing a replacement will then begin.
3.8 Resignation of a Chair or Co-Chair
If a SIG Chair resigns, one of the Co-Chairs will assume the role of “Acting Chair” until the next OPM/SIG forum. At least one month prior to the APNIC Conference, the APNIC Secretariat will initiate procedures for electing the new Chair as described in Section 3 of this document.
If there is no Co-Chair, the outgoing Chair or the Secretariat may appoint an “Acting Chair”. If a Co-Chair resigns, the Chair will follow the procedure for electing a Co-Chair described in Section 3 of this document.
4. Working Groups (WGs)
A Working Group (WG) is formed to perform a specific task and report back to the body that created it. When a Working Group has completed its task(s), it is closed.
A Working Group is usually small in size and consists of volunteers willing to dedicate themselves to one particular task. Working Groups usually conduct their discussions on the Working Group’s mailing list but may also request that time be given for face-to-face discussions at APNIC Conferences.
The Chair and Co- Chair of a Working Group help maintain the group’s focus on the tasks delegated to it by the body that created it.
Working Group Chairs may be elected using the process in Section 3 or may be appointed by the Chair of the body that created it.
5. Birds of a Feather (BoFs)
Birds of a Feather meetings (BoFs) are informal meetings convened for a variety of purposes, such as
exchanging information and discussing new ideas or particular issues. They can be proposed and convened at short notice and there is no formal requirement for submission of papers or posting to mailing lists.
The APNIC Secretariat accepts BoF proposals before each APNIC Conference. There is no formal requirement for submission of papers or posting to mailing lists. However, the BoF Chair/Moderator reports on the results of the BoF at the AGM/AMM.
BoFs are an important part of the process of forming a new Special Interest Group (SIG). When a new SIG has been recommended, a preliminary BoF should be held to determine interest in the proposed subject area, the readiness of individuals to volunteer as Chair, and to develop a charter. A new SIG cannot be created unless a BoF has been held. Sometimes the BoF may have to convene more than once to determine interest and participation in the proposed subject.
6. SIG presenters
SIG Chair(s) will issue a call for presentations at least two months before an APNIC Conference.
6.1 General presentation hints
6.1.1 Speaking
The Asia Pacific region includes many different languages and cultures. English is not the first language for the majority of participants at APNIC Conference, and it is important that presentations are clear, easy to follow, and concise:
- Speak slowly, even if English is your first language.
- Use simple sentence structure rather than complex phrases.
- Try to pause after every slide to give people a chance to absorb the material on the slide.
- Remember to maintain eye contact with the audience. Avoid speaking to the screen or the floor.
- Time your presentations before the forum. Speak out loud when you do this.
6.1.2 Presentation slides
To help conference participants understand your presentation, and to ensure your slides can be read by remote participants watching the webcast of the conference, please:
- Limit each slide to a maximum of four points, or six to eight lines. Slides with too much content are difficult to understand
- Use large fonts if you include tables or diagrams
- Use font and background colours with good contrast
7. Code of conduct
APNIC coordinates many community activities, including conferences, meetings, trainings, workshops, social events, and digital platforms. These are organized for the benefit of all participants and are intended to be valuable and enjoyable to all. A Community Code of Conduct explains expectations for anyone participating in these events and platforms, including delegates, guests, speakers, contributors, commenters, APNIC staff and all others involved. It applies not only to physical events, but also to remote participants, online meeting spaces and digital platforms.
https://www.apnic.net/events/apnic-community-code-of-conduct/
8. Procedure for changing these guidelines
As these guidelines affect the running of all APNIC SIGs, Working Groups, BoFs and the Policy Development Process, any changes must reach consensus among participants of all SIGs.
If a proposal is made to change the SIG Guidelines, the following steps would demonstrate consensus and implement the change.
- A proposal, using the policy proposal template, will be posted to the mailing list for all SIGs at least four weeks prior to a joint SIG forum at an APNIC Conference.
- One Chair for each SIG will form a panel of Chairs to guide the joint SIG forum and determine the outcome.
- Following presentation of the proposal and community discussion, the Chairs will determine if the community has reached a consensus on the change.
- One of the SIG Chairs will report the outcome to the AGM/AMM for its consideration.
- If consensus is reached at the AGM/AMM, the Secretariat will make changes in accordance with the Document Editorial Policy.
https://www.apnic.net/about-apnic/corporate-documents/documents/policy-development/editorial-policy/